• by admin
• 2023-01-12

Installation of pu edge banding rock wool sandwich panel

Many consumers often ask: Can we install the rock wool sandwich panel with pu edge banding after we buy it? To install the rock wool sandwich panel with polyurethane edge banding, we will explain the assembly process of the pu edge banding rock wool sandwich panel for this question.

1. Before installing pu edge banding rock wool sandwich panels, the installation site must be cleaned up to ensure that it is more clean and tidy, so as not to affect the actual effect of the installation.

2. Since the net weight of the pu edge banding rock wool sandwich panel is relatively light, engineering construction cannot be carried out under strong wind temperature, so extreme weather such as strong wind should be avoided as much as possible during assembly.

3. When installing the rock wool sandwich panel, the frame shear wall should be assembled, the wall frame load-bearing beam should be installed, and the key installation process in the early stage of project construction should be done well.

4. After the wall frame load-bearing beam is installed, the technical engineer should conduct the completion acceptance of the steel frame structure. After confirming the safety and no risk, the engineering construction of the rock wool sandwich panel can be carried out.

5. When the PU edge banding rock wool sandwich panel is installed at the bottom, the baffle of the base beam must be installed first, which is conducive to the waterproof and moisture-proof of the house.

6. The installation of polyurethane edge sealed rock wool sandwich panel is equivalent to the roadbed of rural brick houses, which is a very critical stage.

7. After installing the plate support, assemble the polyurethane edge sealed rock wool sandwich panel on the wall frame piece by piece.

8. After installing all the pu edge banding rock wool sandwich panels, the closing panel work should be done, and then the aluminum door and window supporting facilities should be installed on the simple and simple room.

9. Waiting for the engineering acceptance of the professional and technical personnel of the engineering project.