• by admin
• 2022-12-29

What are the common problems in the installation of rock wool sandwich panels?

Color steel plate is a kind of plate that has become common in recent years. It is made of two layers of copper sheets and a polymer sheath core. Rock wool sandwich panels are widely used in various buildings such as operating rooms, electronic workshops, clean rooms and so on. The rock wool sandwich panel can give full play to the good sound insulation and flame retardant grade, and the expected effect of sound insulation.

1. The installation of rock wool sandwich panels also has some places that deserve special attention. When installing our board walls and decorative ceilings, first check the raw materials, types, models, specifications, characteristics and color steel sandwich panel blockboards to determine whether they meet the requirements of the scheme design, and then conduct software performance tests (fire safety, safety factor, Non-toxic, cracking variation coefficient, etc.).

2. Before the rock wool sandwich panel is installed, the panel wall and decorative ceiling panel are successfully completed in the interior decoration concealed project, and the qualified requirements of the construction panel wall and decorative ceiling panel are ensured.

3. When installing the ceiling and board wall, the positive pressure air supply outlet of the filter system, lighting equipment, temperature and smoke detector electronic devices, audio, and the through-board of doors, windows and pipes should be flat, tight and clear, and there should be no dust near the holes , The gap should be sealed with non-flammable materials, and the periphery of the inspection port should be well sealed.

4. The seam between the rock wool sandwich panel and the board wall should be uniform, the error of the board seam gap should not exceed 0.5mm, the joint should be evenly sealed, the seal should be smooth and bright, and the surface should be slightly lower.

5. The installation of wall panels should be vertical, the installation of decorative ceiling should be horizontal, the surface should be flat, the position should be appropriate, the wall and ground, wall and roof, wall and wall, and flat roof should have a reasonable structure to ensure sealing and prevent cracking, and the corners should be is arc-shaped. The flatness of the tablet installation is 1.5mm, the surface flatness is 1.5mm, and the inclination of the tablet and tablet is 1.0mm. After installing the rock wool sandwich panel, the panel should be prevented from being damaged by collision. The surface of the rock wool sandwich panel should be smooth, bright and well-toned, and the protective film on the surface of the panel should be detailed and torn before delivery.