• by admin
• 2022-12-06

How to improve the installation quality of EPS sandwich panel?

Technical communication with construction personnel

EPS sandwich panels are different from traditional wall materials. Some traditional constructors have not updated or mastered enough installation experience, and everyone is obligated to provide professional disclosure and technical training to technicians of relevant projects. Only in this way can we give full play to the advantages of EPS foam sandwich panels and improve the overall installation effect of EPS sandwich panel houses.

Pay attention to working conditions

1. The ground shall be cleaned, the surface shall be free of floating ash, and+50 lines and vertical control lines shall be popped on the wall. The roof waterproof layer and main structure can be installed in the partition wall after acceptance.

2. The floor shall be laid on the door, window hole line and side line.

3. The temperature at the operation site shall not be lower than 5 ℃.

4. Before formal installation, the sample wall shall be installed together and installed after acceptance.

Carry out construction in strict accordance with the construction plan

According to the installation requirements, mark the installation position of the product with a measuring tool, and place the upper and lower fixing devices at this position. Push the foam sandwich panel into the groove of the upper and lower fixtures and press it firmly. When erecting the wallboard, press it firmly into place, and then press it firmly into place at the top of the wallboard. After completing the above installation, please use sealant to smooth the gap between the products and use glass fiber mesh for bonding.

In addition, we also provide professional prefabricated houses, modular houses, steel warehouse, container houses and other related products, where you can obtain the products you need.